Tunze Turbelle Stream 2 Controllable Pump 6155
Reefspecialty.com Price Matching
Submit the URL of the product page where you saw a lower price and we’ll try our best to match the price. We will match all our major competitors. Please make sure you are looking at the exact same product and that the competitor has the product IN STOCK.
Tunze Turbelle Stream 2 Controllable Flow Pump 6155
Turbelle® stream electronic is a speed-controlled pump operating on safety extra-low voltage, to be employed ideally in every aquarium from 200 to > 3,000 litres (52.8 to > 792.5 USgal.) for simulation of lapping waves or tidal currents. It contains a new microprocessor-controlled motor and thus can be called an “intelligent pump”:
The electronic motor adapts its speed automatically to the pump load and always seeks the best efficiency at the lowest possible consumption of energy. This energy consumption is about fifty per cent lower than in conventional pump motors. The pumps will be stopped immediately in case of blockage. After the blockage has been removed, the pumps will start up automatically after a delay of 20 seconds.
The pump driver has been provided with a fish care function, which causes a revolution of the screw every twenty seconds when the pump is at a standstill.
It can be controlled by Multicontroller 7095, 7096 as well as Wavecontroller 7092.
Flow rate 6105: 1.01 - 1.02 m/s
Flow rate 6155: 0.72 - 0.73 m/s
Includes Silence clamp
Low motor heat
Controllable speed, wave simulation, tidal currents
Tunze Turbelle Stream 6155
For aquariums > 3,000 litres (800 USgal.).
Flow rate: 4,000 up to abt. 15,000 l/h 1,050 to 3,950 US gal./h) .
Energy consumption: max. 52 W.
Power supply unit: 100 - 240 V / 50 - 60 Hz.
Cable length: 5 m (196.8 in.).
Dimensions: diam. 90 mm (3.5 in.).
Ejection: diam. 63 mm (2.4 in.).
Magnet Holder with Silence clamp up to a glass thickness of 20 mm (.8 in.).
Includes Magnet Holder
- Additional Information
UPC N/A Manufacturer Tunze