DI WATER at HALF the COST!
Ultra-high purity water (18.2 megohm-cm resistivity) at an very economical
price; water purification systems maximizing pure water production through
application of the laboratory grade deionization resins used in our specialty
deionization cartridges
SpectraPure Membranes have 98.0+% avg. rejection and produce 90 GPD &
180 Gallons Per Day.
New Super Capacity 2-stage Deionizer ---
First Stage revolutionary MAXCAP DIT with 3.5x capacity of other mixed-beds
Lower your DI production costs by over half!
Second DI stage is the DI cartridge that pioneered silica removal ---
SpectraPure's Silica-BusterT Cartridge.
The best pre-filtration available:
Ultra-high efficiency 0.5 micron Sediment Pre-Filter. Our best sediment filter for improved particle removal and long term performance. Not a cheap
import.
1/2 micron Carbon Block Pre-Filter with a 20,000 gallon chlorine removal capacity. Our best carbon block Chloramine eater. All the carbon block you ever
need, period.
Clear housings and pressure gauge
TWO Dual Inline TDS meters, one to monitor RO Membrane performance and one to monitor MAXCAPT and Silica-BusterT performance to signal change required.
Filter wrench
Effective on well water and colloidal silica
Dimensions: 20" x 7" x 16"
SpectraPurer MAXCAP RO/DIT Systems incorporate our SpectraPure Membrane that
produces 90 GPD or180 GPD. It also is the highest rejection rate available at
98% (180 GPD @ 60 psi & 77 degF). Used in combination with our MAXCAP DI T
and silica-removal deionizing cartridges, this system provides the ultimate
removal of algae promoting substances, including colloidal silica, and the
longest deionizing cartridge life, significantly reducing the cost of operation.
This is water purification at its best, an RO/DI system designed to continuously
produce economical ultra-pure water.
Dual stage DI for true "18.2
meg-ohm resistivity laboratory grade water" . This super capacity DI system
consists of a newly developed MAXCAP DI T Cartridge, with over three times as
much contaminate removal capacity than any other Mixed-Bed DI cartridge. The
final stage consists of our Silica-Buster DI cartridge, with two, dual inline
electronic purity monitors to determine the performance of the RO membrane as
well as the DI exhaustion points. While competitors claim ZERO TDS, don't be
fooled by limitations of most inexpensive DI Systems. Besides, it just makes
sense. two stages of high quality DI cartridges definitely will produce higher
purity water more reliably over the life of the cartridges than any single
stage.
The MAXCAP RO/DIT is available with either a FilmTecT 90 or 180
gallon per day membrane.
MAXCAP RO/DIT Systems are equipped with the
finest pre-filtration 0.5 micron MicroTecT pre-filters, and 20,000 ppm-gallon
chlorine/chloramine capacity carbon block pre-filters. Clear filter housings and
a standard pressure gauge provide better visibility of system performance. No
more guessing about plugged pre-filters. Also included is a filter wrench and a
3/4" garden hose adapter.
Our premium grade filters (as used in the
MAXCAP RO/DIT) are a significant upgrade in performance and capacity. Each of
our premium grade filters has been extensively tested in the worst case
locations to insure performance, capacity, and reliability. If you have
excellent tap water (a rarity these days, but it still happens in some places in
the US ) you may be able to scrimp on pre-filtration, but we see that as the
exception in most locations, and thus recommend you purchase the best pre
filtration you can afford. As important as pre filtration is to removal of
contaminants and the life of your expensive RO membrane (and subsequently the
life of your DI cartridges) we think that for ultimate performance and lower
cost of ownership over the production life of your membrane that you should
always use the best pre-filtration available.
Caution: DI cartridge life
is greatly reduced when operated on low pH waters or water with high CO2 levels.
Aeration or de-gassification of RO product water is recommended for removal of
carbon dioxide prior to the DI section.
MC-RODI-90 -
90 gpd with 10 inch cartridge housings $349.99
MC-RODI-180 -
180 gpd ( uses 2 90 gpd membranes) w/ 10 inch $399.00
$349.99 | 
